How Much Does a Concrete Driveway Cost in Daytona Beach?

Concrete driveways are one of the most common projects we handle across Volusia County — and one of the most Googled questions we get is some version of "what does it cost?"

The honest answer: it depends. But "it depends" isn't useful on its own. What we can do is walk you through exactly what it depends on, so you know what you're looking at before you call anyone.

Why Concrete Driveway Costs Vary

No two driveways are the same. A basic replacement slab for a single-car driveway on a flat, accessible lot costs less than a custom stamped double-wide with grade work and a drainage channel. The variables below are what separate a lower-end project from a higher-end one.

1. Size (Square Footage)

The biggest driver of cost is simply how much concrete you need. A single-car driveway might run 250–400 sq ft. A two-car or extended driveway can be 600–1,000 sq ft or more. Concrete is priced by the square foot — the bigger the surface, the higher the total.

2. Thickness

Standard residential driveways are poured at 4 inches. If you're parking heavy vehicles — RVs, large trucks, trailers — a contractor should recommend 5 or 6 inches. Thicker pours use more material and take longer, so expect a higher quote if your situation calls for it.

3. Finish Type

Plain brushed concrete is the most economical finish and works well for most driveways. If you want something more elevated, options include:

• Exposed aggregate — a textured surface with stone visible on top
• Stamped concrete — pressed patterns that mimic brick, slate, or cobblestone
• Decorative overlay — a thin color and texture coating applied over existing concrete

Each step up in finish adds labor and materials cost.

4. Site Conditions

What's already there matters. Tearing out and hauling away an old asphalt or concrete driveway adds demolition cost. A sloped lot or poor drainage may require grading before any concrete goes down. Easy, flat, accessible sites cost less to work on.

5. Base Preparation

The base under your concrete is what determines how long it lasts. Proper compacted fill and gravel sub-base isn't glamorous, but skipping it leads to cracking in a few years. Any contractor giving you a suspiciously low quote may be skimping here. Ask what the base prep includes.

6. Reinforcement

Residential driveways typically use fiber reinforcement mixed into the concrete or a wire mesh laid before the pour. For heavier loads or long spans, rebar may be recommended. Reinforcement adds cost, but it adds life too.

7. Permits

In most Volusia County municipalities, a driveway permit is required if you're replacing an existing apron or extending out to the street. We handle permit applications for our clients — it's part of the job, not an extra. Make sure whoever you hire either pulls permits or clearly explains why they're not needed.

The Most Important Thing: Get a Written Quote

We don't publish a price list because your driveway isn't a commodity. A real quote requires a contractor to see your property, measure the space, assess the site, and tell you exactly what the work includes.

When you get quotes, here's what every written estimate should contain:

• Total square footage being poured
• Concrete thickness (4", 5", or 6")
• Base preparation details (what's being done before the pour)
• Finish type (brushed, stamped, exposed aggregate, etc.)
• Demo/haul-away if old material is being removed
• Permit cost and who's responsible for pulling it
• Timeline (start date, expected completion)
• Payment schedule — never pay 100% upfront

If a quote doesn't include these details, it's not a real quote. It's a number someone gave you verbally to get your signature.

Why the Cheapest Bid Usually Costs More

We've seen it more times than we can count: a homeowner goes with the lowest bid, the contractor cuts corners on base prep or pours thin, and within two or three years the slab is cracking or heaving. Then they're paying twice — once for the cheap job and once to fix it.

Concrete is a long-term investment. A well-poured driveway with proper thickness, a compacted base, and good drainage control should last 20–30 years in the Florida climate. A rushed pour on a bad base might last five.

The right question isn't "who will do it cheapest?" — it's "who will do it right?"

Get a Free Estimate

Graham Concrete Services has been pouring driveways across Volusia County for over 20 years. We're licensed, fully insured, and we pull every permit that's required. When you request an estimate, you get a real written quote with every detail spelled out — no mystery pricing, no verbal promises.

Give us a call at (913) 738-4306 or use the form below. We typically get back to you the same day.